ENB Region 1 Completed Applications 12/24/2003

The applicant proposes to reconstruct 96 feet of bulkhead in-place, 22 feet of bulkhead within 18" of the existing bulkhead and construct 21 feet of new bulkhead to close off an existing boat slip.  Sixty cubic yards of fill will be placed within the boat slip, resulting in the loss of approximately 400 square feet of tidal wetlands known as littoral zone (SM/LZ).  The applicant also proposes to install a 6 foot wide boardwalk.  The project is located at 130 Riviera Drive South, Massapequa, Town of Oyster Bay, Nassau County, NCTM# Section 65, Block 228, Lot 410.  

The Department has made a tentative determination to modify an existing State Pollutant Discharge Elimination System (SPDES) permit for the facility known as BAE SYSTEMS Aerospace Inc., Advanced Systems , formerly known as  Marconi Aerospace Systems Inc. and Hazeltine Corp.  (DEC No. 1472600091/00001). This modification corrects the description of Outfalls 106 and 009/010 to add a total of 4000 GPD blowdown from existing cooling towers #1 and #2, and 4000 GPD of blowdown from newly installed  cooling towers #3 and #4. Effluent monitoring requirements have been added for both outfalls. The site is located at 1 Hazeltine Way, Greenlawn, Town of Huntington.

The applicant proposes to add a second story and a new porch to an existing single family dwelling.  The proposed project is located in the corridor of a Wild, Scenic, and Recreational River (the Nisssequogue River).  The project is located at:  20 Loft Road, Smithtown, Suffolk County.  SCTM # 800-154-2-23.

Applicant proposes to mechanically dredge the channel connecting Goldsmiths Pond with Long Island Sound. The proposed dredge area will be approximately 950 feet long with variable channel width ranging from 40 feet to 85 feet and depths ranging from -4 MLW to -5 MLW. The resulting 21,000 cubic yards of sand will be placed on the beach east (downdrift) of the channel in Peconic Dunes County Park. Also proposed is the mechanical excavation of an approximately 680' x 125' area of beach just west of the existing jetty to obtain approximately 15,000 cubic yards of sand for bypass placement on the east side of the channel. The site is located at the north end of Mill Road in Peconic.