Region 6 SEQR and Other Notices Region 6 SPDES Renewals

ENB Region 6 Completed Applications 01/03/2001

Oneida County
Applicant: Utica Alloys
PO Box 53
Utica, NY 13503-
Facility: Utica Alloys
Leland & Wurz Aves
Utica, NY 13502-
Application ID: 6-3016-00057/00023
Permit(s) Applied for: Article 19 Air Title V Facility
Project is Located: Oneida County
Project Description:

This facility recycles nickel based alloys for the aerospace manufacturing industry. Incoming alloys are physically sorted according to their chemical composition. The alloys are subsequently sized to accommodate customer requirements and cleaned in preparation for vacuum melting at an off-site location.

This facility has two emission units with the following information:

000001 Rotary Kiln-Particulates, VOC's

000002 Degreasing machines, one batch, one in-line-Particulates, VOC's, HAP (trichloroethylene); Regulation NESHAP 40 CFR 63 Subpart T - National Emission Standards for Halogented Solvent Cleaning.

State Environmental Quality Review (SEQR) Determination: Project is an Unlisted Action and will not have a significant impact on the environment. A Negative Declaration is on file. A coordinated review was performed.
State Historic Preservation Act (SHPA) Determination: The proposed activity is not subject to review in accordance with SHPA. The permit type is exempt or the activity is being reviewed in accordance with federal historic preservation regulations.
Coastal Management: This project is not located in a Coastal Management area and is not subject to the Waterfront Revitalization and Coastal Resources Act.
Opportunity for Public Comment: Comments on this project must be submitted in writing to the Contact Person no later than Feb 2 2001.
Contact: Brian D. Fenlon
NYSDEC Region 6 Headquarters
State Office Building
Watertown, NY 13601

Region 6 SEQR and Other Notices Region 6 SPDES Renewals