Department of Environmental Conservation

D E C banner

ENB Region 6 Completed Applications 02/18/2015

Oneida County

Applicant:

Revere Copper Products Inc
1 Revere Park
Rome, NY 13440 -5581

Facility:

Revere Copper Products Inc
One Revere Park
Rome, NY 13440

Application ID:

6-3013-00091/00039

Permit(s) Applied for:

Article 19 Air State Facility

Project is Located:

Oneida County

Project Description:

This department has received a request to issue a permit modification and has drafted an Article 19 (Air Pollution Control) of the Environmental Conservation Law, an Air State Facility Permit, at the facility located at Revere Copper Products, Seneca Street, Rome, NY 13440.

The department has made a tentative determination to approve the modification application of the Revere Copper Products facility, a copper products manufacturer. The State Facility Permit allows the operations of emission units, U-ANNE1, U-CAST1, U-COMB1, U-FURN1, U-OVER1, U-PTNRM, and the U-ROLL1, which includes the copper annealing, furnaces to melt and pour copper and copper alloy, combustion sources for heat, furnace to heat copper cake before rolling, shaving the outside of copper alloy materials, coating operation, and the rolling of copper and copper alloy sheets. The permit also allows the operation of emission unit U-GALV1 which includes the zinc-tin coating line to galvanize copper,copper alloy, and stainless steel sheeting. The facility has as part of this modification changed the pressure drop range on baghouses for emission unit U-CAST, and has removed condition associated with Green house gas emission based on a recent court ruling clarifying major source definition. The facility has capped out of Title V Permitting and Prevention of Significant Deterioration (PSD) requirements by tracking and restricting its emissions of Hazardous Air Pollutants (HAPs), Particulates and PM-10 below major source levels. Individual HAP emissions of 10 tons per year and cumulative HAP emissions of 25 tons, 100 tons per year for Particulates and PM-10 at the facility level, and 25 tons for Particulates and 15 tons per year for PM-10 on emission at a process level. This department has received a request to issue a permit modification and has drafted an Article 19 (Air Pollution Control) of the Environmental Conservation Law, an Air State Facility Permit, at the facility located at Revere Copper Products, Seneca Street, Rome, NY 13440.

Availability of Application Documents:

Filed application documents, and Department draft permits where applicable, are available for inspection during normal business hours at the address of the contact person. To ensure timely service at the time of inspection, it is recommended that an appointment be made with the contact person.

State Environmental Quality Review (SEQR) Determination:

Project is not subject to SEQR because it is a Type II action.

SEQR Lead Agency: None Designated

State Historic Preservation Act (SHPA) Determination:

The proposed activity is not subject to review in accordance with SHPA. The permit type is exempt or the activity is being reviewed in accordance with federal historic preservation regulations.

Coastal Management:

This project is not located in a Coastal Management area and is not subject to the Waterfront Revitalization and Coastal Resources Act.

Opportunity for Public Comment:

Comments on this project must be submitted in writing to the Contact Person no later than Mar 20, 2015.

Contact:

Lawrence R Ambeau
NYSDEC Region 6 Headquarters
State Office Building - 317 Washington St
Watertown, NY 13601
(315)785-2245
DEP.R6@dec.ny.gov


  • Contact for this Page
  • ENB
    NYS DEC
    Division of Environmental Permits
    625 Broadway, 4th Floor
    Albany, NY 12233-1750
    518-402-9167
    Send us an email
  • This Page Covers
  • Page applies to all NYS regions